Edible
Requires preparation
Set your location to see data for your region.



Laccaria laccata, commonly called the deceiver, is a widespread small to medium-sized agaric fungus. Highly variable in color depending on moisture levels, it ranges from reddish-tan when hydrated to pale ochre when dry. It features widely spaced, thick gills dusted with white spores and a tough, fibrous stem. Found in varied woodlands throughout temperate regions worldwide, it is a common pioneer mushroom forming mutualistic connections with both deciduous and coniferous trees.
Identification, habitat, and key differences.
Forager
Fruitbody structure
- Fruit body form
- Fruit body form: Cap, stipe.
- Color of mycelium at the base of the fruitbody
- Color of mycelium at the base of the fruitbody: white.
Cap
- Cap shape
- Cap shape: hemispherical.
Cap shape: convex.
Cap shape: convex (flattened profile). - Cap surface relief
- Cap surface relief: smooth.
- Cap covering
- Cap covering: scaly (fine scales, sometimes).
- Cap colour
- Cap colour: flesh-coloured.
Cap colour: orange.
Cap colour: orange-brown.
Cap colour: rust-coloured.
Cap colour: vinaceous. - Margin orientation
- Margin orientation: curved inward.
- Cap margin outline
- Cap margin outline: even.
Cap margin outline: wavy. - Cap diameter
- The cap measures 10–80 mm in diameter.
- Cap centre
- Cap centre: Depressed.
- Cap hygrophaneity
- Cap hygrophaneity: hygrophanous.
Underside of the cap
- Hymenophore type
- Hymenophore type: gills.
Gills at stipe
- Hymenophore attachment to the stipe
- Hymenophore attachment to the stipe: attached to the stipe (gills).
- Hymenophore profile at the stipe
- Hymenophore profile at the stipe: notched at the stipe (gills).
- Decurrence of the hymenophore on the stem
- Decurrence of the hymenophore on the stem: decurrent with a tooth (gills).
Decurrence of the hymenophore on the stem: decurrent (gills). - Macroscopic structure of the free gill edge
- Macroscopic structure of the free gill edge: entire, with a smooth outline.
- Relationship between the color of the edge and the face of the gill
- Relationship between the color of the edge and the face of the gill: same colour as the gill face.
- Natural color of the gill surface
- Natural color of the gill surface: flesh pink.
Natural color of the gill surface: dark brownish pink. - Gill spacing
- Gill spacing: closely spaced.
Gill spacing: widely spaced. - Gill thickness
- Gill thickness: thin or thick.
Stem and base
- Stipe shape
- Stipe shape: cylindrical.
Stipe shape: club-shaped (nearly). - Stipe base
- Stipe base: bulbous (slightly).
- Stipe colour
- Stipe colour: rust-coloured, flesh-coloured, wine-coloured, orange or orange-brown.
- Stipe surface relief
- Stipe surface relief: striate.
- Stipe surface covering
- Stipe surface covering: fibrillose.
- Stipe interior
- Stipe interior: solid.
Stipe interior: hollow. - Stipe length
- Stipe length: 25–100 mm.
- Stipe diameter
- Stipe diameter: 5–14 mm.
Flesh
- Flesh odour
- Flesh odour: mushroom-like and herbaceous.
Flesh odour: radish-like (similar odour). - Taste character of the flesh
- Taste character of the flesh: mild.
Where and when it grows
- Habitat
- Habitat: deciduous woodland or mixed woodland.
- Substrate
- Substrate: soil or humus.
- Fruit body growth pattern
- Fruit body growth pattern: solitary or in groups.
- Occurrence frequency
- Occurrence frequency: very common.
- Fruiting season
- Fruit bodies appear from June to November.
- Distribution area
- Distribution area: confirmed.
Edibility and culinary use
- Edibility
- Edible
- Required preparation
- Requires preparation
Law
- Protection
- It is not on the Polish list of protected fungal species.
- Trade
- It is not on the Polish list of mushrooms approved for trade.
FAQ
Is Laccaria laccata considered edible?
Yes, the caps are edible after thorough cooking, though the fibrous stems are generally discarded due to their tough texture.
Where does Laccaria laccata grow?
It grows across temperate woodlands, heathlands, parklands, and disturbed soils, associating with pines, spruces, oaks, and beeches.
When does Laccaria laccata produce fruit bodies?
Fruiting begins in early summer and continues through late autumn, often lasting until the first severe winter frosts.
Why is it called the deceiver?
Its appearance changes drastically with moisture, shifting from vibrant reddish-flesh color when wet to dull buff when dried out.
Is heat treatment required before eating?
Yes, thorough heat treatment is mandatory to eliminate gastrointestinal irritants and ensure safe digestion.
In which countries is it traditionally eaten?
It is gathered and consumed across Central and Eastern Europe, as well as parts of East Asia and North America.
What does Laccaria laccata taste like?
Cooked caps have a mild, pleasant mushroom flavor with a slightly sweet note and a delicate, tender texture.
Does Laccaria laccata have non-culinary applications?
Yes, it is used in commercial forestry to inoculate seedling roots and by artisan craftspeople to dye natural fibers.
What colors does it produce in natural wool dyeing?
Depending on the mordant applied, it yields soft earthy hues including yellow-tan, warm buff, and muted khaki.
Who first scientifically described Laccaria laccata?
Austrian naturalist Giovanni Antonio Scopoli described it in 1772, and Mordecai Cubitt Cooke moved it to Laccaria in 1884.
Enthusiast
Names and history
- Current national name
- Lakówka pospolita
- Current taxonomic name
- Laccaria laccata
Home observations
Spore print
- Required materials
- fresh, mature cap, sheet of paper, glass or small bowl, water
- Time
- 2–24 h
- Procedure
- Place the cap underside down on the paper.
- Add a drop of water on top and cover.
- After 2–24 hours, lift the cap and examine the deposit.
What to look for
- Spore print colour
- Spore print colour: white.
Under the microscope
- Required materials
- light microscope, microscope slide and cover slip, needle, water, spores from print
- Procedure
- Transfer a small amount of the spore print onto the slide using a needle.
- Add a drop of water, cover with a cover slip, and examine the spores.
What to look for
- Spore shape
- Spore shape: broadly ellipsoid. Spore shape: ellipsoid.
- Spore surface
- Spore surface: ornamented.
- Spore dimensions
- Length 6–11 µm, width 4–9 µm.
Compare dimensions after calibrating the microscope scale.
Ecology and distribution
- Mycorrhizal hosts
- General species association: Mycorrhizal hosts: Abies (general partner list).
General species association: Mycorrhizal hosts: Betula (general partner list).
General species association: Mycorrhizal hosts: Castanea (general partner list).
General species association: Mycorrhizal hosts: Fagus (general partner list).
General species association: Mycorrhizal hosts: Picea abies (general partner list).
General species association: Mycorrhizal hosts: Picea (general partner list).
General species association: Mycorrhizal hosts: Pinus sylvestris (general partner list).
General species association: Mycorrhizal hosts: Pinus (general partner list).
General species association: Mycorrhizal hosts: Populus (general partner list).
General species association: Mycorrhizal hosts: Pseudotsuga menziesii (general partner list).
General species association: Mycorrhizal hosts: Quercus (general partner list).
General species association: Mycorrhizal hosts: Tsuga (general partner list).
General species association: Mycorrhizal hosts: Nothofagus (general partner list).
General species association: Mycorrhizal hosts: Salix lapponum (general partner list). - Mode of nutrition
- Mode of nutrition: ectomycorrhizal.
Non-culinary uses
Outside the kitchen, Laccaria laccata serves notable non-culinary functions in applied silviculture and traditional textile crafts. In commercial forestry and land reclamation, the fungus is cultivated as a practical root inoculum for tree seedlings. Forest nurseries deliberately apply spore slurries or vegetative mycelium to the root systems of pine, spruce, and birch saplings destined for reforestation on clear-cut timberlands, industrial mine spoils, and degraded soils, directly enhancing sapling establishment and transplant survival rates.
In textile crafts and artisan dyeing, the mature fruit bodies are utilized by natural dyers to produce durable colorants for natural animal fibers such as wool and silk. Simmering the fresh or dried mushrooms in dye baths yields a palette of muted, earthy shades ranging from soft tan and beige to warm golden-buff. When combined with mineral mordants such as alum or iron, the dye bath produces stable, light-fast neutral tones favored in traditional textile handicrafts and historic garment restoration.
History and culture
Laccaria laccata holds a distinctive place in European mycological heritage and folk taxonomy, famously commemorated through its enduring English common name, the deceiver. This moniker originated from nineteenth-century English country naturalists and country folk, who noted its baffling capacity to alter color, shape, and overall demeanor across alternating wet and dry conditions.
Early botanical records trace back to the eighteenth century, where Austrian naturalist Giovanni Antonio Scopoli first documented the taxon as Agaricus laccatus in 1772, followed by British botanist William Hudson. British mycologists Miles Joseph Berkeley and Christopher Edmund Broome formally established the genus Laccaria in 1883, with Mordecai Cubitt Cooke placing the species into the genus in 1884. Victorian natural history authors frequently cited the deceiver in popular field compendia as an emblematic illustration of botanical mutability, cautioning amateur naturalists about nature's penchant for visual deception. In British and Slavic rural folklore, the mushroom symbolized nature's elusive and chameleonic character. While it rarely entered heroic myths, its ubiquitous presence across country paths made it a familiar fixture in provincial woodland lore and early popularizing literature.
Edibility and safety
Laccaria laccata is classified as an edible mushroom, but it requires thorough culinary heat treatment prior to ingestion. Raw or partially heated specimens contain thermo-labile substances that can provoke mild to moderate gastrointestinal irritation, including stomach discomfort and nausea. Prolonged boiling or pan-frying neutralizes these compounds entirely. Only the caps are recommended for eating, as the stipes are intensely fibrous, stringy, and unpalatable.
Culinary appreciation and preferences vary by geographic region. In Central and Eastern European countries, particularly Poland, the Czech Republic, and Russia, the caps are regularly gathered and valued as an everyday table mushroom. In contrast, mycologists and foragers in the United Kingdom and North America often regard the species as an inferior edible due to its modest size and thin flesh, frequently passing it over in favor of fleshier forest species. Cooked caps possess a mild, agreeable fungal flavor with delicate sweetness and tender consistency. Consuming specimens collected from heavily contaminated road verges or industrial soils is strongly discouraged due to species-level affinity for accumulating heavy metals.
Habitat and occurrence
Laccaria laccata has a nearly cosmopolitan distribution across temperate and boreal regions of the Northern Hemisphere, with recorded populations throughout Europe, North America, and Asia. It also occurs in introduced pine plantations across parts of the Southern Hemisphere.
The species colonizes a diverse range of forest environments, including temperate deciduous woodlands, acidic heathlands, montane conifer forests, mossy road margins, and damp peat bogs. It associates readily with a broad spectrum of ectomycorrhizal host trees, most notably Scots pine (Pinus sylvestris), Norway spruce (Picea abies), silver birch (Betula pendula), European beech (Fagus sylvatica), and various oak (Quercus) species. It favors nutrient-poor, sandy, or moss-covered mineral soils and frequently colonizes newly disturbed substrates.
The fruiting season extends from early summer through late autumn across lowland Europe, generally peaking between August and October. In subalpine and northern boreal zones, the season is compressed between July and September, whereas Mediterranean regions witness fruiting into December following seasonal rains.
Researcher
Edibility and culinary use
Source findings: edibility, consumption, and use
- Edibility
- Edible — identification source
ČMS — Laccaria laccata, zakres atlasowy · Culinary use: edible mushroom, we use only caps; atlas assessment.
- Required processing
- Requires preparation
Źródło bez opisu bibliograficznego · Edibility and safety, paragraph 2: „A condition for safe consumption of this species is subjecting it to strict heat treatment – boiling or stewing.”; preparation recommendation.
Scientific names and taxonomy
- Current scientific name
Laccaria laccata
- Zakres ujęcia taksonomicznego
Laccaria laccata (Scop.) Cooke,1884 w ujęciu typifikacji Dovana i in.2025,DOI10.3390/jof11080575: lektotyp Schaeffer1762,tab.XIII,fig.ii,MBT10026634 i epityp SingerC4083(BAFC),Femsjö17VIII1964,MBT10026635. Pomiary zbiorcze rewizji są podstawą mikroskopii. Starsze atlasy, zdjęcia i badania zachowują własne oznaczenia źródłowe; nie uznano ich za ponownie zidentyfikowane molekularnie. Nie połączono L.affinis,L.proxima ani var.pallidifolia na podstawie dawnej synonimii lub nazwy kladu proxima1.
[14] [20]
Ecology and distribution
Laboratory diagnostics
Structured data
Basidia
Hymenial cystidia
- Abundance of cystidia at the specified location
- Abundance of cystidia at the specified location: scattered. [20]
Abundance of cystidia at the specified location: abundant. [20]
Abundance of cystidia at the specified location: absent. [20] - Presence of cystidium constrictions
- Presence of cystidium constrictions: present (occasionally). [20]
- Hymenial cystidium length
- Hymenial cystidium length: 15–70 µm. [20]
- Optical appearance of the hymenial cystidium
- Optical appearance of the hymenial cystidium: hyaline. [20]
- Hymenial cystidium shape
- Hymenial cystidium shape: cylindrical. [20]
Hymenial cystidium shape: clavate (narrow). [20] - Wall thickness of the specified hymenial cystidium
- Wall thickness of the specified hymenial cystidium: thin-walled. [20]
- Hymenial cystidium width
- Hymenial cystidium width: 3–8 µm. [20]
- Branching
- Branching: branched (rarely). [20]
- Shape regularity
- Shape regularity: flexuous. [20]
- Presence of pleurocystidia
- Presence of pleurocystidia: not observed. [20]
Remaining laboratory characters
- Wall ornamentation
- Wall ornamentation: encrusted. [20]
Pileipellis
- Optical appearance of pileipellis hyphae
- Optical appearance of pileipellis hyphae: hyaline. [20]
- Arrangement of pileipellis hyphae
- Arrangement of pileipellis hyphae: radial. [20]
- Shape of pileipellis elements
- Shape of pileipellis elements: cylindrical. [20]
- Colour of pileipellis hyphae
- Colour of pileipellis hyphae: yellow-brown. [20]
- Incrustation of cuticle hyphae
- Incrustation of cuticle hyphae: present (sometimes). [20]
- Structure of the pileipellis
- Structure of the pileipellis: cutis. [20]
Spores
- Spore length
- Spore length: 6–11 µm. [20]
- Form of spore ornamentation
- Form of spore ornamentation: finely spiny. [20]
- Height of spore ornamentation
- Height of spore ornamentation: 0.3–1.5 µm. [20]
- Spore length-to-width ratio
- Spore length-to-width ratio: 1–1.65. [20]
- Spore surface
- Spore surface: ornamented. [20]
- Spore width
- Spore width: 4–9 µm. [20]
Stipe cuticle
Material and research methods
Description of characteristics — source and scope
Material: Description of flesh taste in the revision typifying the species.
Reading scope: Full text.
Limitations: No sensory protocol; authors' evaluation was retained.
Composition and activity study — material and limitations
Material: Whole dried fruit bodies of Laccaria laccata from the area after mining contamination Guadiamar, Spain; voucher SEV-C51, MK616245–MK616246, N = 10.
Reading scope: Full text.
Limitations: Result of a local study of material identified in 2020; without reassignment to the epitype 2025. Fruit bodies were dried at 70 °C for 48 h; mineralization HNO3 110 °C 2 h, ICP-OES; As by hydride technique. BCF is the ratio to the pseudototal content in soil, unitless. Concentrations Table S3 in mg/kg dry weight; mean and SE, N = 10. Table 3 BCF reports SD.
Metody i zapisy źródłowe — Materiał zbiorczy rewizji 2025: świeży i suszony; 258 zarodników z 10 próbek i 8 kolekcji. Materiał makroskopowy: Włochy, Szwecja i Wielka Brytania. Osobne pomiary epitypu zachowano w dokumentacji.
Metoda źródłowa. Technika: mikroskopia świetlna (LM). Medium: aqueous potassium hydroxide. Stężenie: 5%. Opis metody w źródle: Rehydratacja suchego materiału w 5% wodnym KOH i barwienie 1% czerwienią Kongo. Zarodniki mierzono bez ornamentacji, podstawki bez sterygm. Badano też świeży materiał; nie podano osobnego medium każdej próbki. Barwienie: 1% Congo Red.
Wygląd optyczny podstawki — zapis źródłowy: „hyaline” [20]
Wygląd optyczny strzępek skórki — zapis źródłowy: „contents hyaline to yellowish brown” [20]
Układ strzępek skórki — zapis źródłowy: „radially arranged cylindrical to subcylindrical hyphae” [20]
Liczba zarodników na jednej podstawce — zapis źródłowy: „tetrasporic, very rarely bisporic” [20]
Długość podstawki; Szerokość podstawki — zapis źródłowy: „25–60×7.5–16µm;without sterigmata” [20]
Kształt podstawki — zapis źródłowy: „clavate” [20]
Obfitość cystyd — zapis źródłowy: „Cheilocystidia scattered to abundant; absent possible in other collections” [20]
Obfitość cystyd — zapis źródłowy: „Cheilocystidia absent or scattered to abundant” [20]
Obecność przewężeń cystydy — zapis źródłowy: „Cheilocystidia occasionally strangulate” [20]
Długość cystydy hymenialnej; Szerokość cystydy hymenialnej — zapis źródłowy: „Cheilocystidia15–70×3–8µm” [20]
Wygląd optyczny cystydy hymenialnej — zapis źródłowy: „Cheilocystidia hyaline” [20]
Kształt cystydy hymenialnej — zapis źródłowy: „Cheilocystidia cylindrical” [20]
Kształt cystydy hymenialnej — zapis źródłowy: „Cheilocystidia narrowly clavate” [20]
Grubość ściany dokładnie określonej cystydy hymenialnej — zapis źródłowy: „Cheilocystidia thin-walled” [20]
Układ — zapis źródłowy: „Stipitipellis a cutis” [20]
Rozgałęzienie — zapis źródłowy: „Cheilocystidia rarely branched” [20]
Barwa pigmentu — zapis źródłowy: „Stipitipellis with yellowish brown intracellular pigment” [20]
Regularność kształtu — zapis źródłowy: „Cheilocystidia flexuose” [20]
Ornamentacja ściany — zapis źródłowy: „Stipitipellis slightly encrusting pigment” [20]
Kształt elementów skórki kapelusza — zapis źródłowy: „cylindrical to subcylindrical hyphae” [20]
Barwa strzępek skórki kapelusza — zapis źródłowy: „contents yellowish brown due to intracellular pigment” [20]
Inkrustacja strzępek skórki — zapis źródłowy: „sometimes with slightly encrusting pigment” [20]
Organizacja skórki kapelusza — zapis źródłowy: „Pileipellis a cutis” [20]
Kształt komórki końcowej skórki kapelusza — zapis źródłowy: „terminal elements cylindrical” [20]
Kształt komórki końcowej skórki kapelusza — zapis źródłowy: „terminal elements from cylindrical, narrowly fusiform to clavate” [20]
Kształt komórki końcowej skórki kapelusza — zapis źródłowy: „terminal elements clavate” [20]
Obecność pleurocystyd — zapis źródłowy: „Pleurocystidia are not observed.” [20]
Długość zarodnika — zapis źródłowy: „(6.0–)7.5–8.6–9.4(–11.0)µm, excluding ornamentation;[258/10/8]” [20]
Forma ornamentacji zarodnika — zapis źródłowy: „echinulate;crowded spines” [20]
Wysokość ornamentacji zarodnika — zapis źródłowy: „spines0.3–1.5µm high” [20]
Iloraz długości i szerokości zarodnika — zapis źródłowy: „Q=(1.00–)1.19–1.30–1.41(–1.65); średnia1.30 nie jest granicą zakresu” [20]
Kształt zarodnika — zapis źródłowy: „generally broadly ellipsoid to ellipsoid” [20]
Powierzchnia zarodnika — zapis źródłowy: „echinulate” [20]
Szerokość zarodnika — zapis źródłowy: „(4.0–)6.0–6.6–7.5(–9.0)µm, excluding ornamentation;[258/10/8]” [20]
Szerokość strzępek skórki trzonu — zapis źródłowy: „Stipitipellis cutis of5–10µm wide hyphae” [20]
Name and scope of source determinations
Type and former designations: Laccaria laccata (Scop.) Cooke,1884 in the sense of the typification by Dovana et al.2025, DOI 10.3390/jof 11080575: lectotype Schaeffer 1762, tab. XIII, fig. ii, MBT 10026634 and epitype Singer C 4083(BAFC), Femsjö17 VIII 1964, MBT 10026635. Aggregate measurements of the revision form the basis of microscopy. Older atlases, photographs, and studies retain their own source designations; they were not recognized as molecularly re-identified. L. affinis, L. proxima, or var. pallidifolia were not combined on the basis of former synonymy or the clade name proxima 1.
Name L.affinis: ČMS lists L. affinis as a synonym. Re-analysis by Dovana et al.(2025), DOI 10.3390/jof 11010011, treats it as a distinct lineage. Its former data were not transferred to this record. Possible synonymy of L. proxima and L. proximella with L. laccata remains an open hypothesis in revision 2025 requiring type material.
Microscopy and methods of the revision 2025
Aggregate range and statistics: 258 spores from 10 samples and 8 collections were examined. Length is(6,0–)7,5–8,6–9,4(–11,0)µm, width(4,0–)6,0–6,6–7,5(–9,0)µm, Q(1,00–)1,19–1,30–1,41(–1,65). In the authors' notation, the middle numbers indicate mean−SD, mean, mean+SD; the min–max fields contain the full extremes, without a second "extreme" range. Spores were measured without ornamentation, basidia without sterigmata.
Epitype C 4083: The epitype from Femsjö,17 August 1964, has its own measurements: length(7,0–)7,5–8,2–9,0(–9,5)µm, width(5,5–)6,0–6,7–7,5(–8,0)µm, Q(1,10–)1,14–1,24–1,34(–1,52). The mean Q1,24 applies to the epitype;1,30 applies to the aggregate material. After rehydration, spines were sometimes invisible under the light microscope, but were visible in SEM. Some large spines are surrounded by smaller ones up to 0,3 µm.
Exact parts and recording limits: Cheilocystidia are variable: cylindrical, flexuous or narrowly clavate, sometimes constricted, rarely branched; in the study from absent to scattered and abundant. The authors observed no pleurocystidia; the result does not mean their biological absence in the species. The stipe cuticle has a cutis organization and hyphae of 5–10 µm with yellow-brown intracellular and finely encrusting pigment.
Medium and preparation: Dry samples were rehydrated in 5% aqueous KOH and stained with 1% Congo red. Fresh material was also examined; no separate medium was given for each measurement. For SEM, concentrated ammonia,70%ethanol, further dehydration, critical point drying, and Au–Pd sputter coating were described. These are data on the examination method, not conditions of mushroom shape or size.
Ecology, countries, and atlas designations
Country scope: The revision 2025 lists 20 countries based on a preliminary review of nr ITS matches with 99,5–100% similarity: Argentina, Canada, Chile, China, Czech Republic, Finland, France, Germany, India, Italy, Latvia, Lithuania, New Zealand, Poland, Russia, Slovakia, Spain, Sweden, United Kingdom, and USA. The list is not a complete range map or abundance estimate; detailed sequence attribution requires Table S3. Dates of single Italian, Swedish, and British collections do not determine the species' season. ČMS also lists Ústecký kraj(31 V 2024,28 VII 2023).
Atlas season and frequency: Snowarski reports VI–XI and very common occurrence for Poland; ČMS reports VI–XI and very abundant species. These are assessments of the taxon recognized in the respective atlases. Their non-identical concepts include older synonyms and subglobose spores; these assessments were not considered a re-determination of the frequency of the epitypified lineage. Source values remain attributed to their own countries.
Plant associations: Associations listed by the revision include Abies, Betula pendula, Castanea dentata and C. sativa, Fagus, Nothofagus, Picea abies and P. mariana, Pinus contorta var. latifolia, P. muricata, P. patula, P. radiata, P. sylvestris, Populus, Pseudotsuga menziesii, Quercus petraea and Q. robur, Salix lapponum, and Tsuga canadensis. This is not an experimental preference test. In the partners field, existing exact species or parent genera were used; detailed names remain here without simplification. Nothofagus and Salix have no entry in the current partner list.
Odor: The revision describes the odor as herbaceous-fungoid or subraphanoid. Co-occurring fungal and herbal components and a separate alternative of a radish-like odor were recorded.
Source collections and localities
Polish atlas collections: Four separately read Snowarski cards:15 July 2000, Milicz forests,20000715.18.00;22 July 2000, Oder valley,20000722.6.00 and 20000722.2.00;23 July 2000, vicinity of Oborniki Śląskie,20000723.2.00. Author of collection and identification: Marek Snowarski. The region name„Dolny Śląsk”remains a source designation; without determining coordinates or automatic conversion to voivodeship boundaries.
Elements in material from Guadiamar — scope of the study
Material and identification: Gil-Martínez and co-authors (2020) studied material described as Laccaria laccata from the Guadiamar Green Corridor near Seville in Spain, from December 2016. Voucher: Universidad de Sevilla, SEV-C 51. Material was collected from ten points, at least three fruit bodies per point. The authors report morphological and molecular control as well as sequences MK616245–MK616246. Their conformity with the epitype established in 2025 was not confirmed; the identification and source results were retained.
Method and denominator: Whole fruit bodies (cap, hymenophore, and stipe combined) were dried for 48 hours at 70°C, mineralized in nitric acid for 2 hours at 110°C, and analyzed by ICP-OES; hydride generation was used for arsenic. BCF is the dimensionless ratio of the concentration in the fruit body to the pseudototal concentration in the soil. It is not an mg/kg value nor a separate result for cap and stipe.
Table 3 — BCF, n = 10: As: 0,002–0,015; mean 0,0096, SD 0,004; Cd: 2,75–12,58; mean 5,09, SD 2,87; Co: 0,204–2,286; mean 0,626, SD 0,602; Cu: 0,462–1,186; mean 0,795, SD 0,217; Mn: 0,049–0,442; mean 0,107, SD 0,119; Ni: 0,018–0,1; mean 0,044, SD 0,027; Pb: 0,006–0,012; mean 0,0086, SD 0,0021; S: 0,0001–0,0002; mean 0,0001, SD <0.0001; Zn: 0,715–1,296; mean 0,942, SD 0,173. The data pertain to the contaminated area covered by the study. They were not extrapolated to all fruit bodies of the species or to the assessment of its edibility.
Unresolved original data: The Fe row in Table 3 BCF contains inconsistent numbers: mean 0,0057, SD 0,0018, minimum 0,031, and maximum 0,0079. They were retained in the documentation without guessing the correct minimum. Fruit body concentrations were read from the relevant Table S3 of the supplement: ranges as well as means and SE for N = 10. Exemplary consumption amounts from the historical Table S2 relate to the limits adopted there and the study site, not a general safe portion of the species; limits for As and Pb were already marked by the authors as withdrawn.
Order of development in the source description
Phases without default age: The revision describes the pileus as initially hemispherical, then convex to plano-convex. The lamellae are initially pale, pinkish-flesh, later predominantly dark pinkish-brown; with age, a white spore deposit settles on them. The stipe is solid, later hollow. The order from the original has been preserved, without adding an exact age of young/mature/old based solely on relative terms. Variants of shape, color, and interior remain separate source records.
Substrate in species revision
Soil and humus: Dovana and co-authors (2025) describe the fruiting bodies growing on soil or humus („terrestrial or on humus”). Humus was not equated with fresh leaf litter. The description does not provide quantitative humus content, pH measurement, or species preference for soil texture.
Polish Wojewoda list — historical view
Entry on page 367: Wojewoda (2003), p. 367, records Laccaria laccata in coniferous, deciduous, and mixed forests, scrub, forest clearings, arboretums, and parks, as well as on dunes, occasionally pastures. Gives season June–November, species very common, edible, and not threatened in the sense accepted at that time. Mentions possibility of confusion with L. bicolor and L. proxima; L. proxima has a separate entry. Former collections were not automatically assigned to the epitype established in 2025.
Occurrence verification — scope and limitations
Material: Źródłowy przegląd występowania — Chiny.
Reading scope: Full text.
Review date: 06.11.2026.
Occurrence verification — scope and limitations
Material: Źródłowy przegląd występowania — Czechy — dane ogólne.
Reading scope: Full text.
Review date: 06.11.2026.
Occurrence verification — scope and limitations
Material: Źródłowy przegląd występowania — Finlandia — zakres źródłowy.
Reading scope: Full text.
Review date: 06.11.2026.
Occurrence verification — scope and limitations
Material: Źródłowy przegląd występowania — Francja.
Reading scope: Full text.
Review date: 06.11.2026.
Occurrence verification — scope and limitations
Material: Źródłowy przegląd występowania — Niemcy.
Reading scope: Full text.
Review date: 06.11.2026.
Occurrence verification — scope and limitations
Material: Źródłowy przegląd występowania — Włochy.
Reading scope: Full text.
Review date: 06.11.2026.
Occurrence verification — scope and limitations
Material: Źródłowy przegląd występowania — Litwa.
Reading scope: Full text.
Review date: 06.11.2026.
Occurrence verification — scope and limitations
Material: Źródłowy przegląd występowania — Polska — dane ogólne.
Reading scope: Full text.
Review date: 06.11.2026.
Occurrence verification — scope and limitations
Material: Źródłowy przegląd występowania — Rosja.
Reading scope: Full text.
Review date: 06.11.2026.
Occurrence verification — scope and limitations
Material: Źródłowy przegląd występowania — Słowacja.
Reading scope: Full text.
Review date: 06.11.2026.
Occurrence verification — scope and limitations
Material: Źródłowy przegląd występowania — Hiszpania.
Reading scope: Full text.
Review date: 06.11.2026.
Occurrence verification — scope and limitations
Material: Źródłowy przegląd występowania — Szwecja.
Reading scope: Full text.
Review date: 06.11.2026.
Occurrence verification — scope and limitations
Material: Źródłowy przegląd występowania — Wielka Brytania.
Reading scope: Full text.
Review date: 06.11.2026.
Occurrence verification — scope and limitations
Material: Źródłowy przegląd występowania — Stany Zjednoczone.
Reading scope: Full text.
Review date: 06.11.2026.
Common limitations of source reading
Limitations: The scope and method of review remain in the source. Does not establish the full range,season, or frequency. Older atlases were not equated with the new verification of the epitypified lineage.
Occurrence verification — scope and limitations
Material: Źródłowy przegląd występowania — kraj środkowoczeski.
Reading scope: Source excerpts.
Source excerpt read; full text and methods were not verified.
Review date: 06.11.2026.
Limitations: The scope and method of review remain in the source. Does not establish the full range,season, or frequency. Older atlases were not equated with the new verification of the epitypified lineage.
Occurrence verification — scope and limitations
Material: Źródłowy przegląd występowania — Argentyna — dane ogólne.
Reading scope: Full text.
Review date: 07.11.2026.
Occurrence verification — scope and limitations
Material: Źródłowy przegląd występowania — Kanada — dane ogólne.
Reading scope: Full text.
Review date: 07.11.2026.
Occurrence verification — scope and limitations
Material: Źródłowy przegląd występowania — Chile — dane ogólne.
Reading scope: Full text.
Review date: 07.11.2026.
Occurrence verification — scope and limitations
Material: Źródłowy przegląd występowania — Indie — dane ogólne.
Reading scope: Full text.
Review date: 07.11.2026.
Occurrence verification — scope and limitations
Material: Źródłowy przegląd występowania — Łotwa — dane ogólne.
Reading scope: Full text.
Review date: 07.11.2026.
Occurrence verification — scope and limitations
Material: Źródłowy przegląd występowania — Nowa Zelandia — dane ogólne.
Reading scope: Full text.
Review date: 07.11.2026.
Common limitations of source reading
Limitations: Source sequence review. Does not establish frequency or season in this country.
Occurrence verification — scope and limitations
Material: Źródłowy przegląd występowania — Kraj ustecki.
Reading scope: Source excerpts.
Source excerpt read; full text and methods were not verified.
Review date: 07.11.2026.
Limitations: Historical atlas identifications, without sequence verification against the epitype 2025. Collection dates were not used as a regular season.
Scope of study
Required checks are settled.
Legal basis and scope of assessment
Regulations for location: Poland
Basis of protection information
The species is not listed in Annexes 1–4 of the regulation on mushroom protection(Dz.U.2014/1408).
Basis of trade information
The species is not listed in the list of mushrooms permitted for trade and production of processed products (Dz.U.2026/258,załącznik1). This is not an evaluation of edibility.
Analytical results
Composition and laboratory activity
- Quantitative content of component in material
- Quantitative content of component in material: 3.02 mg/kg (Cd, fruit body preparation, standard error: 0.45 mg/kg, on a dry mass basis, whole fruiting body, mean). [15]
Quantitative content of component in material: 0.176–0.235 mg/kg (S, fruit body preparation, on a dry mass basis, whole fruiting body, reported value). [15]
Quantitative content of component in material: 0.21 mg/kg (S, fruit body preparation, standard error: 0.006 mg/kg, on a dry mass basis, whole fruiting body, mean). [15]
Quantitative content of component in material: 1.94 mg/kg (lead (Pb), fruit body preparation, standard error: 0.2 mg/kg, on a dry mass basis, whole fruiting body, mean). [15]
Quantitative content of component in material: 15.1–106.1 mg/kg (manganese (Mn), fruit body preparation, on a dry mass basis, whole fruiting body, reported value). [15]
Quantitative content of component in material: 212 mg/kg (iron (Fe), fruit body preparation, standard error: 25 mg/kg, on a dry mass basis, whole fruiting body, mean). [15]
Quantitative content of component in material: 178 mg/kg (zinc (Zn), fruit body preparation, standard error: 9 mg/kg, on a dry mass basis, whole fruiting body, mean). [15]
Quantitative content of component in material: 1.45–6.01 mg/kg (Cd, fruit body preparation, on a dry mass basis, whole fruiting body, reported value). [15]
Quantitative content of component in material: 1.13–3.48 mg/kg (lead (Pb), fruit body preparation, on a dry mass basis, whole fruiting body, reported value). [15]
Quantitative content of component in material: 132 mg/kg (copper (Cu), fruit body preparation, standard error: 6 mg/kg, on a dry mass basis, whole fruiting body, mean). [15]
Quantitative content of component in material: 129–219 mg/kg (zinc (Zn), fruit body preparation, on a dry mass basis, whole fruiting body, reported value). [15]
Quantitative content of component in material: 0.363 mg/kg (Co, fruit body preparation, standard error: 0.098 mg/kg, on a dry mass basis, whole fruiting body, mean). [15]
Quantitative content of component in material: 1.36 mg/kg (As, fruit body preparation, standard error: 0.19 mg/kg, on a dry mass basis, whole fruiting body, mean). [15]
Quantitative content of component in material: 0.631 mg/kg (Ni, fruit body preparation, standard error: 0.114 mg/kg, on a dry mass basis, whole fruiting body, mean). [15]
Quantitative content of component in material: 0.289–1.37 mg/kg (Ni, fruit body preparation, on a dry mass basis, whole fruiting body, reported value). [15]
Quantitative content of component in material: 116–344 mg/kg (iron (Fe), fruit body preparation, on a dry mass basis, whole fruiting body, reported value). [15]
Quantitative content of component in material: 105–159 mg/kg (copper (Cu), fruit body preparation, on a dry mass basis, whole fruiting body, reported value). [15]
Quantitative content of component in material: 0.134–1.202 mg/kg (Co, fruit body preparation, on a dry mass basis, whole fruiting body, reported value). [15]
Quantitative content of component in material: 0.26–2.25 mg/kg (As, fruit body preparation, on a dry mass basis, whole fruiting body, reported value). [15]
Quantitative content of component in material: 29.4 mg/kg (manganese (Mn), fruit body preparation, standard error: 8.7 mg/kg, on a dry mass basis, whole fruiting body, mean). [15]
Element distribution
- Element bioconcentration factor
- Element bioconcentration factor: 0.462–1.186 (copper (Cu), whole fruiting body relative to soil, on a dry mass basis, range reported by the source). [15]
Element bioconcentration factor: 5.09 (Cd, whole fruiting body relative to soil, on a dry mass basis, standard deviation: 2.87, mean). [15]
Element bioconcentration factor: 0.715–1.296 (zinc (Zn), whole fruiting body relative to soil, on a dry mass basis, range reported by the source). [15]
Element bioconcentration factor: 0.049–0.442 (manganese (Mn), whole fruiting body relative to soil, on a dry mass basis, range reported by the source). [15]
Element bioconcentration factor: 0.044 (Ni, whole fruiting body relative to soil, on a dry mass basis, standard deviation: 0.027, mean). [15]
Element bioconcentration factor: 0.795 (copper (Cu), whole fruiting body relative to soil, on a dry mass basis, standard deviation: 0.217, mean). [15]
Element bioconcentration factor: 0.0096 (As, whole fruiting body relative to soil, on a dry mass basis, standard deviation: 0.004, mean). [15]
Element bioconcentration factor: 0.018–0.1 (Ni, whole fruiting body relative to soil, on a dry mass basis, range reported by the source). [15]
Element bioconcentration factor: 0.204–2.286 (Co, whole fruiting body relative to soil, on a dry mass basis, range reported by the source). [15]
Element bioconcentration factor: 0.626 (Co, whole fruiting body relative to soil, on a dry mass basis, standard deviation: 0.602, mean). [15]
Element bioconcentration factor: 0.942 (zinc (Zn), whole fruiting body relative to soil, on a dry mass basis, standard deviation: 0.173, mean). [15]
Element bioconcentration factor: 0.0086 (lead (Pb), whole fruiting body relative to soil, on a dry mass basis, standard deviation: 0.0021, mean). [15]
Element bioconcentration factor: 0.107 (manganese (Mn), whole fruiting body relative to soil, on a dry mass basis, standard deviation: 0.119, mean). [15]
Element bioconcentration factor: 2.75–12.58 (Cd, whole fruiting body relative to soil, on a dry mass basis, range reported by the source). [15]
Element bioconcentration factor: 0.006–0.012 (lead (Pb), whole fruiting body relative to soil, on a dry mass basis, range reported by the source). [15]
Element bioconcentration factor: 0.002–0.015 (As, whole fruiting body relative to soil, on a dry mass basis, range reported by the source). [15]
Habitat and occurrence
Confirmed distribution range
All areas confirmed in recorded source data.
| Country | Regions and localities | Fruiting | Sources |
|---|---|---|---|
| Argentina | No regions identified in recorded data | Not determined |
|
| Canada | No regions identified in recorded data | Not determined |
|
| Chile — general data | No regions identified in recorded data | Not determined |
|
| China | No regions identified in recorded data | Not determined |
|
| Czech Republic | Central Bohemian Region; Ústí nad Labem Region | VI–XI |
|
| Germany | No regions identified in recorded data | Not determined |
|
| Spain | No regions identified in recorded data | Not determined |
|
| Finland | No regions identified in recorded data | Not determined |
|
| France | No regions identified in recorded data | Not determined |
|
| United Kingdom | No regions identified in recorded data | Not determined |
|
| India | No regions identified in recorded data | Not determined |
|
| Italy | No regions identified in recorded data | Not determined |
|
| Lithuania | No regions identified in recorded data | Not determined |
|
| Latvia | No regions identified in recorded data | Not determined |
|
| New Zealand | No regions identified in recorded data | Not determined |
|
| Poland | No regions identified in recorded data | VI–XI |
|
| Russia | No regions identified in recorded data | Not determined |
|
| Sweden | No regions identified in recorded data | Not determined |
|
| Slovakia | No regions identified in recorded data | Not determined |
|
| United States | No regions identified in recorded data | Not determined |
|
Sources
- Dz.U. 2014/1408
- Dz.U. 2026/258
- ČMS — Laccaria laccata, zakres atlasowy
- GBIF — dokładny zaakceptowany gatunek 2530926
- Gil-Martínez 2020 — BCF i stężenia z pełnego suplementu
- Gil-Martínez i in. 2020 — tabele uzupełniające S1–S3
- Gil-Martínez i in. 2020 — trace elements, Scientific Reports10:6434
- Snowarski — zalogowana karta Tx877 i odrębne taksony (also [21])
- Dovana i in. 2025 — Solving the Enigma of the Identity of Laccaria laccata
- Wojewoda 2003 — Checklist of Polish Larger Basidiomycetes, s. 367